- Professional Grade
- Factory tested performance and efficiency
- Superior vertical priming (10ft)(3.2m)
- Completely sealed motor
- 3.5-4.5 GPM (13.25-17.05 LPM) flow range
- Ultra efficient motor design
- Low heat and power consumption
- Capable of being run dry
- 3/4 Quick attach
- DC and AC voltage options
- Material of consumption options
Typical Applications:
- Agricultural/Industrial chemical spraying
- Liquid transfer
- De-Icing
- Dust suppression
- RV Fresh water
- Construction equipment
PUMP INFORMATION
TYPE
- 3 chamber diaphragm pump
- Self priming and capable of being run dry
PRESSURE CONTROL
- Demand
- Bypass
LIQUID TEMPERATURE
- 140°F (60°C) Max
PRIMING CAPABILITIES
- 10ft (3m)
MAX PRSSURE
- 100 PSI (6.9 BAR)
INLET/OUTLET PORTS
- 3/4″ Quick Attach
WEIGHT
- 5LBS (2.3 kg)
Remco 15.1 L/min 100psi 12v Pump
I-12572PRICING DISPLAYED IS THE FROM PRICE. COST MAY VARY DUE TO OPTIONAL INCLUSIONS
Capable of continuous heavy duty workloads, the Remco Professional Grade 5500 series has proven itself as an industry leader in reliability and spraying efficiency
Featuring a compact design, this pump is versatile and can perform in all situations.
Contact our team to find out:
- If this product is right for you
- Info and pricing on options & accessories
- Stock availability & delivery timeframe
- More about our nation-wide subsidised freight
- Professional Grade
- Factory tested performance and efficiency
- Superior vertical priming (10ft)(3.2m)
- Completely sealed motor
- 3.5-4.5 GPM (13.25-17.05 LPM) flow range
- Ultra efficient motor design
- Low heat and power consumption
- Capable of being run dry
- 3/4 Quick attach
- DC and AC voltage options
- Material of consumption options
Typical Applications:
- Agricultural/Industrial chemical spraying
- Liquid transfer
- De-Icing
- Dust suppression
- RV Fresh water
- Construction equipment
PUMP INFORMATION
TYPE
- 3 chamber diaphragm pump
- Self priming and capable of being run dry
PRESSURE CONTROL
- Demand
- Bypass
LIQUID TEMPERATURE
- 140°F (60°C) Max
PRIMING CAPABILITIES
- 10ft (3m)
MAX PRSSURE
- 100 PSI (6.9 BAR)
INLET/OUTLET PORTS
- 3/4″ Quick Attach
WEIGHT
- 5LBS (2.3 kg)
Features
FAQs
What types of fluids can the Remco 15.1 L/min pump handle?
The Remco 15.1 L/min pump is designed for a wide range of applications including agricultural chemicals, fresh water, and de-icing fluids. It is suitable for most non-corrosive liquids; however, always confirm chemical compatibility with TTi’s compatibility chart before use to prevent damage to internal pump components.
Can the pump be used for continuous operation?
While the Remco pump can run dry without damage, it is not intended for extended continuous operation. To maximise service life, avoid overheating by allowing periodic rest intervals during prolonged use and ensure adequate ventilation around the pump.
What accessories are recommended for optimal performance?
For best results, use TTi’s compatible hoses and fittings that match the ¾” quick-attach connections. A pressure gauge is also recommended to monitor system performance, and a suction filter will help protect the pump from debris and extend its life.
Is there a specific way to set up the pump for maximum efficiency?
Position the pump as close as possible to the liquid source, keeping the suction line short and free of sharp bends to improve priming and flow. Ensure all fittings are airtight to prevent air leaks that could reduce suction performance.
How do I maintain the pump to ensure its longevity?
Regularly inspect the pump body and fittings for signs of wear or leaks. Clean the inlet filter frequently to prevent blockages, and flush the system with clean water after use to remove residues. Store the pump in a dry, protected location away from direct sunlight when not in use.
