Remco 8.3 L/min 100psi 12v Pump

The Remco 8.3 L/min pump is designed to handle a wide range of fluids, including agricultural chemicals, herbicides, pesticides, and fresh water. Always confirm that your chosen fluid is chemically compatible with the pump’s materials and seals to prevent premature wear or damage. TTi can provide a Liquid Compatibility Chart if required.

Inspect the pump regularly for signs of wear or leaks, and ensure the motor housing and fluid ports are clean. Check the suction filter and seals periodically, and replace them if they show signs of deterioration. Running the pump briefly every few weeks helps prevent the seals from drying out and maintains performance during storage.

The Remco 8.3 L/min pump has a maximum pressure rating of 100 psi, which is suitable for most general spraying and transfer applications. For operations that require significantly higher pressures, consider using a pump designed for that specific purpose to ensure optimal performance and safety.

The Remco pump is self-priming and can tolerate short periods of dry running. However, extended dry operation can cause heat build-up and reduce the life of the pump’s components. Always ensure fluid is available during normal use and monitor operation closely to avoid overheating.

To achieve the best performance, pair the pump with compatible hoses, fittings, and a suction filter to prevent debris from entering the system. Installing a pressure relief valve or bypass regulator is also recommended to protect against over-pressurisation and ensure smooth, reliable operation.